QUAYSIDE COLLECTABLES!

Quayside Scania

Search Impex, are pleased to announce the release of a 1:50 scale Scania Highline (6×2) with 3 axle, Thermo King refrigerated trailer, customised in the striking livery of Grimsby based operator Quayside Distribution. The model, produced exclusively for Search Impex by WSI Collectables, is a certificated, Limited Edition (105 pieces).

Established in 1997 as a fish transportation business serving, initially, just the Humber ports area, Quayside Distribution started life with three trucks (a Scania rigid, a Mercedes rigid and a Scania artic ) and one highly determined founder with a big vision – Mick Wilkinson.  As an ex-truck driver, Mick made the tough decision to stop working for someone else and take charge of his own destiny. Continuous investment in the business from the outset, together with terrific drive and perseverance has seen Quayside Distribution develop rapidly.  Having initially aimed to cater for the needs and requirements of the UK’s fresh fish industry, the business has actually grown into the UK’s leading full load transporter of not only fresh, but also frozen seafood. Based at distribution centres around the country, the operation has a commercial vehicle fleet which, today, numbers around 85 units and 120 trailers.  Quayside Distribution runs throughout the night collecting from all domestic ports and inland markets around the UK and delivers to a wide variety of outlets, including major supermarkets and their associated RDC’s (regional distribution centres), commercial catering outlets, restaurants and even fish and chip shops.  The Company also offers an overnight service to France, for onward distribution of fresh fish and seafood products to Belgium, Spain and Italy.

Models, available from Search Impex, are priced at £137 each (including UK delivery & VAT).  To check availability of this and other models, collectors can visit the Search Impex website at www.search-impex.co.uk or call them on 01332 873 555.

Quayside Scania

 

 

DENBY AND THE SEVEN DAFS!

1/87 Scale Denby

One of the latest truck releases from customised promotional model vehicle specialists, Search Impex, is a 1:87 scale DAF XF105 Super Space (6×2) and 3 axle, curtain trailer customised in Denby Transport’s livery.  The models, with die cast metal cabs and trailers, are sure to lend some weight to an already well known name!

 Lincoln based Denby Transport is a long established haulage business with roots which can be traced back to the 1920’s and to founder, Bill Denby, Grandfather of the present (and third generation) Managing Director, Peter Denby.  Having slowly and steadily built up a successful road transport company with a solid reputation, the business, along with many other haulage companies, found itself caught up in post war Government policy and was nationalised in 1949.  As a result of this, Bill Denby took the opportunity to pursue other business interests and leave the transport industry.  Denationalisation of transport started in 1954 and it was some seven years later, finding the lure of trucks too powerful, that Bill opted to re-enter the industry.  With the original Denby Transport trucks having long since gone to other homes, he purchased another small haulage company and once again set about building up the business, this time together with his son, Richard. Over the next 50 years, with input and effort from three generations of the same family, Denby Transport has grown into today’s impressive operation.  With around 50 tractor units (a mix of DAF & Volvo) and more than 140 trailers, including curtain, double deck, stepframe and probably the largest fleet of ramped flats in the Anglo-French market, the business undertakes a variety of general haulage work, but specialises particularly in the transport of agricultural and industrial machinery. The DAF XF105 Super Space 6×2 truck is the latest addition to the fleet – and a further seven of the DAF units will be joining later this year.

Produced exclusively for Search Impex by WSI Collectibles, the model is priced at £23 (incl VAT & UK postage) and only a small number of models are available to collectors.  For details of availability of this and other models, collectors can visit the Search Impex website at www.search-impex.co.uk or call them on 01332 873 555

PRIDE OF THE FENS!

Knowles Transport Volvo

Customised promotional model vehicle specialists, Search Impex, are pleased to announce the release of a 1:50 scale Volvo FH3 Globetrotter XL (6×2) with 3 axle, curtain trailer, customised in the well known livery of East Anglia based operator Knowles Transport Ltd. The model has been produced exclusively for Search Impex by WSI Collectables as a certificated, Limited Edition (105 pieces).

Founded in 1932 by Gerald Knowles, the haulage operation began life with the transporting of agricultural produce to the wholesale London markets (Covent Garden, in particular) and the carrying of sugar beet from the fields of East Anglia to the local refineries. Some 80 years on, whilst general haulage remains the backbone of the operation, the Company has grown unrecognisably. With a fleet approaching 90 trucks and 200 trailers, the business remains privately owned and serves an impressive customer base which includes many household brands from both UK blue chip companies, as well as multi-national FMCG (Fast Moving Consumer Goods) customers. The Company operates throughout the UK and delivers to retail locations, dedicated distribution warehouses and manufacturing plants alike. Hand in hand with its distribution service, Knowles Transport also operates 1.5 million square feet of warehousing within East Anglia, in easy reach of Felixstowe and Tilbury ports, with a huge variety of storage options.

Models, available from Search Impex, are priced at £137 each (including UK delivery & VAT). To check availability of this and other models, collectors can visit the Search Impex website at www.search-impex.co.uk or call them on 01332 873 555.

Knowles Transport Volvo

Fancy A Fast French First ?

Tuesday afternoon one of our drivers phones in to say; “Can I have Thursday and Friday off please?” to which the reply was “Yes of course”, as it was for personal reasons. The only bugger being is that Thursday export and reload were already planned and going ahead, what to do??!……All eyes at Kersey Freight turn to me, so I text the wife……naturally she was happy to have me out the house for a couple of days. So I finally get a couple of days back in the driving seat and as a help, to make the office boys day easier we leave the country via the Euro Tunnel. Which is very nice, but it means that I am still yet to ship out of the country via a boat from Douvres….next time! My first trip to Paris was underway.

"The French Connection" by Kersey Freight

I’ll be driving K18 KFL, a DAF XF105 SSC with a 460hp engine. My chaperon for the trip will be regular driver of K19 KFL, Mr Graham “Smithy” Smith. We meet in the yard at 0445 Thursday do our daily checks and discuss who’s going in front. It’s decided that Smithy would as I couldn’t find my gate card! We leave at 0500hrs on the dot. K19 is half a click faster than K18 but K19 on this trip is a little heavier so I catch Graham on the hills.

K19 KFL - M20

An uneventful trip down to Folkestone, we arrive about 0725 and lucky for us, there is a train at 5 to 8, so we drive straight through and onto the waiting train. Much to Smithy’s disappointment, he was at the front of the train, usually not a problem, but he had spent an hour yesterday washing his truck. The first thing I noticed since my last check in at the tunnel back in 2007, is the distinct lack of staff. Its now an automated check in and there are no staff or train dollies dishing out the tea and pain au chocolates. Cost saving I guess.

K19 KFL Driving onto Eurotunnel

For those of you who haven’t driven an artic onto the train before, let me tell you its a good little challenge. Its a tricky manoeuvre to get yourself onto the loading car, do you put one wheel onto the platform the other side then swing back or is it enough to stay on the loading car?? It’s tight believe me. I wont make out its impossible but unless you do get it right first time, you have to do a shunt with all the loading staff watching, the pressure is then on. But I am pleased to say that i’ve still got it! I prefer the wheel just to touch the platform the other side then swing back and Voila! Through the well marked and gauged guide poles and onto the train. The narrowness carries on along the length of the train, so beware of your side skirts or low exhausts. Off the train in Calais and we’re off down the A26, A1 to Paris. Time for some truck spotting, well not til we reach the A1 anyway. The A26 was very quiet, just the odd GB truck heading back to Blighty. Just as Smithy said, it all changed when we reached the A1, loads of trucks and loads worth spotting. Some well known European custom trucks and a few nice unknowns. There something in particular I spotted but I can’t for the life of me remember what it was!

Aulnay Sous Bois

Unloading in Aulnay Sous Bois

Delivering to Aulnay Sous Bois, Paris

After a few last words from Smithy he carried on to his delivery point and I carried onto mine. Lucky for me I had an easy address to find, just off the A3 at Aulnay Sous Bois. I found the road and the warehouse. The waiting warehouse man waved me in to back straight onto the loading bay. A quick tight reverse, into a wide-ish gate, with an annoying fly like forklift truck buzzing about trying to find every blind spot in my mirrors. I arrived at Midday and by 1220 the team of 3 arrived to start unloading me. Its a 2 hour tip which is quick really as most of our Paris deliveries are usually 3 hours or a bit more. I have a confession to make. For the last 1/4 mile to my delivery point I used a satnav as a backup to my map. I know some of you reading this will be tutting in disgust. What I will say is, our satnavs are the truck specific ones. So it has the dimensions of the truck in and it finds the appropriate route. I have to say I was amazed at the accuracy of the thing. The directions were spot on and the on screen displays are metre perfect…….sorry GW but I was impressed. I still think using a map is the way forward so you have an idea of where you are and whats about, but to use the satnav to guide you to your final destination, i’ve been turned, I think its a good thing. Click on the map to see the good old fashion way of seeing my route.

Scania T-Cab

With a few of my best French-Chinese pleasantries I leave Aulnay Sous Bois at 1430, heading up to the small town of Hermes, south east of Beauvais. Usually it’s 1 and a 1/4 hour drive, but due to an accident near Parc Asterix, it took me an hour and a half, so I arrive at Hermes at 1600hrs. The journey back up the A1 for a couple of junctions is a busy one, due to traffic and the accident, but still plenty to spot, including some planes at the Charles De Gaul airport, and a very nice T-cab Scania burbling away in the jam. For this journey I decided to try the satnav properly. So I left it on the whole way. I knew which junction to come off the motorway at and which towns to follow across to Hermes but the satnav is actually a reassurance to have, although I did have the women turned off as that is still a step to far!

Reloading in Hermes for Haverhill

Another tight loading bay with those annoyingly tight guide poles on the floor, is it really necessary? really??. I was loaded and sealed with 22 tons of liquid that was to be kept at +2’c. My first ever job with a fridge. Leaving Hermes at 1700hrs, I headed up towards Beauvais, through some golf ball sized hail, the big DAF pulls well when loaded at just under 40 tons. Onto the A16 for a few more miles, I decide to stop at the Hardivillers services at J16 on the A16. I pull my card out at 1745, exactly 13 hours after I started. I park near the bottom of services away from the other trucks. The fridge motor cuts in every 8-10 mins as it was still 23’c until about 9pm when I finally called it a night. I’d showered and had a microwave curry, so I went to bed wondering if i’d be kept awake all night by the sticky weather and the fridge blaring away 2 foot from my pillow. I was disturbed by neither. The fridge woke me just once in the night, but the cool of the roof top cooler’s breeze sent me straight back off to sleep. A tough life for you truckers these days init!?

Home from Home

My first night out on the continent in anger for 5 years and it was made very pleasant by the DAF’s comfort.

DAF Resting after a hot days work

Up at 0315 Friday and on the road by 0345. No need to be quite that early, I could have had another hour in bed, but I wanted to get on with it. The A16 in the early morning is a brilliant road and desserted of traffic. This was the scene for most of the way upto Boulogne, where the traffic picked up a bit.

The Busy A16 Early in The Morning!

I was told about the hills up the A16 and I wasn’t disappointed. The DAF held its own up hill and down dale although the auto box does let it down, so I left it in manual for the duration up to Calais. A few hills are real killers and at 1 point we were down to 9th gear, but the DAF coped well. The hills were good fun as it made me have to drive the truck for real, using the gears and exhaust brake in turn, all in all it was a pleasure. Well that is apart from that bloody great big viaduct at Boulogne! I’m not one for heights, and as you swoop round onto it, there isn’t much warning of just quite how high up you are! Into Calais to fill up with Diesel. I’d just like to add I didn’t use the satnav at all on the Friday. A quick call from Smithy confirmed he was in the area so we met up in the port for the 0800 sailing to Dover on DFDS Deal Seaways. I checked in and was directed into the heart beat magnet check. Nothing found, although there were plenty of immigrants pouring out of one eastern European truck. An hour to kill waiting in the lanes at Calais, so it was time for some serious spotting. A few good spots, but they’ll be another blog on the spotting. Into the boat, a half decent breakfast it was just a pity the fried eggs were only just lukewarm. It wasn’t til I had started tucking in that Smithy appeared and told me about the microwave to reheat your meal. Next time.

Driving onto DFDS Deal Seaways

Nice day for Crossing the Channel

A bit tight on the DFDS boat Deal Seaways

A glorious morning for sailing, although the wind nearly had me off the top deck. On arriving in Dover (My first ship into Dover with a truck) we came off the boat and I followed out another Kersey Freight trailer and then Smithy appeared alongside, coming down the upper ramp. A Kersey Freight Convoy through the dock. We decide to come back up the M20, so as you leave the dock you stay in the left lane and it takes you round under Jubilee Way and up a new slip road straight onto the main road along Dover seafront. I have to say it was far to easy to leave the dock. No officials any where, just follow the other trucks, no Customs to be seen, no Passport control, no Police and happily no VOSA.

Kersey Freight Convoy Coming Out of Dover Docks

Kersey Freight Convoy Coming Out of Dover Docks

Back up the M20, M25, M11, A11 and drop into Haverhill. I arrive at 1300hrs for a 1500hrs booking. I was tipped and on my way back to the yard, 30 minutes before my booking time. A quick cross country driver back to Hadleigh via Sudbury and that was that.

All in all it was a pleasure to have a couple of days back on the road. I know it all when to plan and I had no real hold ups or problems, but it was really an easy couple of days apart from the early starts. But as we all know its the only time to travel! I look forward to August when I will be doing a full week’s driving hopefully with a couple of trips to Paris. Just a quick thanks to Mr Graham Smith (see below) for being an excellent chaperon. Sorry it’s been a long blog but I had a lot to say and I thoroughly enjoyed my little trip………..although French radio is still crap!

Graham Smith in Pole Position

Thumpers Dumper

WIL 2597 today in Buxton

For those of you who like them big, you can’t go far wrong than to visit the Hillhead Show, that has just finished at Hillhead Quarry in Buxton. The exhibition is a showcase of every piece of Aggregate, Recycling and Construction machinery going. The one problem being how do you get all the machinery ranges of all the big construction companies to a massive quarry in the hilliest part of Derbyshire?? The same as any other cargo that has to be delivered…….by truck of course!

WIL 2597 today in Buxton

Of all these different machines there are 2 that are bigger than most, the biggest excavators that arrive in kit form and the dumper trucks. To get a huge CAT 777 dumper through the hilly narrow roads of Buxton is a challenge for most, but for my previous employers it’s just another day at the office! H.C. Wilson were draughted in to take the 777 to the show by Ascroft Transport. Driver Mick “Thumper” Farrow was given the job and with the help of 3 or 4 Police escorts and Wilsons own escort van the low bridges, junctions and general public were kept out the way and with a minimum of fuss “European Colosuss” made its way into Hillhead. The wheels of the dumper are removed to reduced the height on the trailer and also to reduce the width. height being the major issue but reducing the width helps on the narrow roads and with the traffic junctions.

WIL 2597 today in Buxton

The excellent on the spot photos are courtesy of expert plant, part time truck photographer, Northern H.C. Wilson project camera man and kiddies book writer Paul Argent. Paul Argent of RPA Photography fame is often recruited by Wilsons to photograph jobs around the North but Hillhead is Pauls own idea of heavy…..big trucks and big machines!

WIL 2597 today in Buxton

The big 580hp V8 Scania made light work of the 60 ton (I think!) load. There is a notorious hill as you drive into Hillhead Quarry that has in the past caught out various trucks delivering to the show, but not this time. With Thumper at the wheel and the V8 showing its muscle I would have happily sat at The Railway Pub in Buxton and watched them negotiate the traffic lights, in fact I could have sat there all day and watched all the trucks loaded with big boys toys go on by! Thanks for the photos Mr Argent and well done to the Wilson boys on another job expertly well done!!

Mediterranean MAN (It’s Photo Heavy!)

North Sheilds to Larnaka, Cyprus Reload Neuwied, Germany to Warrington

A very leading photo, Marshy and TB on the move heading towards Athens. Where could they be off too?? With Marshy’s track record the answer really is; Anywhere!

North Sheilds to Larnaka, Cyprus Reload Neuwied, Germany to Warrington

How about that? I think that narrows it down some what. Mr Marsh sat in Lavrio Port, Greece waiting for the Salamis Lines ferry to??….you guessed it Cyprus. The job loaded in North Shields, GB and delivered to the vessel “Lewek Falcon” in Larnaca Port. The cargo was a 5 ton winch. The MAN for the job was Steve Marsh! Our top blogger and owner driver of Steve Marsh Express. Just while i’m hovering over the S.M.E. sales desk, there is really only one man worth trusting with such a job, when it’s crucial to get to a far away destination on time to meet a vessel that’s in Port for a few hours, call THE MARSH!

Now although we all love a photo Marshy didn’t start snapping until the sun started to shine, so first up on the way was the Port of Ancona in Italy. This place must be awesome. From what I can tell it is always rammo wall to wall with trucks, ships and any thing that will fit on a boat to the Islands of the Mediterranean. Luckily for our little MAN there was just room for him on the end of the row, while waiting for the Minoan Lines boat to Patras (I finally got a Minoan Lines sticker!). There was also a chance for the classic shot of truck next to ferry.

North Sheilds to Larnaka, Cyprus Reload Neuwied, Germany to Warrington

North Sheilds to Larnaka, Cyprus Reload Neuwied, Germany to Warrington

After arriving in Greece it was across to Lavrio in Greece for the Salamis Lines ferry to Cyprus. Having reached Lavrio, it was time for a weekend break before getting the Cyprus tub. Marshy wasn’t the only one weekended in Lavrio. Also in Lavrio port were 2 Jordanian’s who were putting 4 trucks on the boat to Israel to sell back in Jordan. Then they were flying back to Germany to pick up 2 more trucks. For those of you who aren’t too familiar with ferries to Cyprus, most tend to be multi-drop. By this I mean they tend to do a bit of a round trip rather than straight back and fourth. This ship was also bound for Haifa, Israel as well as Limassol. I know its out of focus, but Marshy spoke to this Dutch DAF driver, who was empty on his way to Israel, with what looks like a container trailer.

North Sheilds to Larnaka, Cyprus Reload Neuwied, Germany to Warrington

North Sheilds to Larnaka, Cyprus Reload Neuwied, Germany to Warrington

Dear Mr Marsh, I’m sorry to say I can’t remember which boat scene was the outgoing and which was the return. The on board boat shots are always good, as you can see who else is busy doing similar trips. I remember one leg out or back was quite busy from what Marshy said. Have a good look at both pics as I have no idea which is which, but the Greek Scania horse box is in both!

North Sheilds to Larnaka, Cyprus Reload Neuwied, Germany to Warrington

North Sheilds to Larnaka, Cyprus Reload Neuwied, Germany to Warrington

On arrival in Limassol, you are always greeted with some ex-pat trucks and of course every driver who goes has to get a pic of the Salamis Lines Scania 111 shunter. See if you can guess which well known UK haulier’s Volvo has a new life in the sun, leave your comments below.

North Sheilds to Larnaka, Cyprus Reload Neuwied, Germany to Warrington

North Sheilds to Larnaka, Cyprus Reload Neuwied, Germany to Warrington

North Sheilds to Larnaka, Cyprus Reload Neuwied, Germany to Warrington

North Sheilds to Larnaka, Cyprus Reload Neuwied, Germany to Warrington

…Too easy for all you spotters! As you can see on arrival it was straight off the boat in Limassol and on the road to Larnaca. About 70 km down the road is the Port of Larnaca where the ships winch was safely delivered to the Vessel.

North Sheilds to Larnaka, Cyprus Reload Neuwied, Germany to Warrington

All that’s left after tipping is a wander back to Limassol, a wait for the boat back to Greece and then a long empty run back to Neuwied near Koblenz in Germany for a prearranged load back to the UK. Marshy has now been to more Mediterranean Islands than any gang of pesky Mosquito’s that we are all plagued with on our holidays. Saying that a week after his return from Cyprus the little MAN was right up North in Finland and then last trip, last week he was back at yet another Mediterranean island, but a lot, lot smaller, still a top class story to be told….another blog for another day. Now it’s time for the little MAN to have a rest under a palm tree and wait for his ferry back to Greece. Nice one Steve!

North Sheilds to Larnaka, Cyprus Reload Neuwied, Germany to Warrington

Well Boss……

You said find safe parking, so I made the boat and was chained down, but you’ll never believe what happened…..”

Untitled

There you are happy you made the boat and happy that your truck is safely lashed down, so you go for a douche and a pie. Surely this one can’t be blamed on the drivers?? Our Pilot friend Mr Shortis came across this in the Maritime Bullentin, while eating his Cornflakes at 20,000 feet. This is what the article says;

“Ferry Nils Holgersson struck the portside of a ferry Urd in Luebeck-Travemuende, Germany, at around 1815 LT May 03. Urd was berthed at Berth 3 of the Scandinavian Quay, vessel suffered 2×3 meters hole under waterline, with resulting water ingress. Crew started to pump out water with vessel’s pumps, rescue boats, firefighting boats, tugs and other service boats of the port rushed to assist. Urd also suffered serious damages in upper decks area, some trucks were damaged, one destroyed. Port traffic was affected for some time. Urd arrived from Liepaja with trucks and cars on board, offloading started later in the evening, but some 50 trucks in the lower deck couldn’t be accessed because of the damages. With water ingress in breached hull, Urd bow-tilted, and later in the evening bow rested on the bottom. Nils Holgersson arrived from Trelleborg with 63 passengers on board, vessel suffered bow damages, and was berthed at berth 6. nobody was injured in the collision. The cause of the incident still unknown. Photos from local media. Passenger ro-ro vessel Urd IMO 7826855, GRT 13144, built 1981, flag Denmark, manager SCANDLINES DEUTSCHLAND. Passenger ro-ro vessel Nils Holgersson IMO 9217230, GRT 36468, built 2001, flag Germany, manager TT-Line.”

Looks like it was a good job they had finished the loading, otherwise it may have been a little worse. Is there any where you can now park up and safely leave your truck?….Doesn’t look like it!

Untitled

Untitled

My MAN

As I have no Internet at home this week thanks to the expert services of a well know British Telecommunications (bugger!) company, I thought I’d just share a quick few photo’s from my days gone album. Back in the day I had a few of my own tonka toys, which I loved and to this day I still prefer a little lorry to those big articulated thingy’s (well nearly). So just a random selection to fill a day and as I have 5 minutes spare in the office before departing. Here is V413 KPU….and if you’ve seen them before, then aren’t you lucky!

Another handball load.
V413 KPU - MAN 8163 (9)

The dock side of Canary Wharf, London.
V413 KPU - MAN 8163 (21)

I knew someone wouldn’t mind me parking on Mum and Dads lawn!
V413 KPU - MAN 8163 (31)

My good mate Howard and I both taking a quick breather on the A1 near Pontefract.
V413 KPU - MAN 8163 (36)

A sunny Sunday in Cornwall.
V413 KPU - MAN 8163 (40)

Another small load for the little MAN.
V413 KPU - MAN 8163 (68)

Although I had the airbrushed Atego, I do think I preferred the MAN. We just had more of a bond and we did so much more together, you know how it is!! Want to comment? please do or email me; ben@truckblog.co.uk

En-tyre-ly Different Class

Dutch Tyre Mini Artic

This lovely VW mini artic was spotted by top Scania man, owner driver Mike Tasker. Spotted in Holland last week, Mike says it’s a tyre wagon, belonging to Dutch firm Recamax. I have seen a few decent and ingenious tyre vans / trucks on the continent but none as smart as this little one. It looks like it’s almost big enough to be a complete tyre fitting workshop! Good Spot Mike, keep the pics coming.

**Just on another note, I am suffering with no Internet at home again, so the blog has once again taken a back seat thanks to BT!! Hoping to be back up and running Wednesday or Thursday.**